The ECM 590 is a self-contained, cabless hydraulic crawler drill capable of drilling up to 4 in. (102 mm) holes.

ECM 590

INGERSOLL - RAND

Serial #: R110275C

Model: 1995

Hole Diameter: 2-1/2 - 4-1/2 in.

DRIFTER

Drifter #1: YH70

Hole Diameter #1: 2.5-4' / 64-102 mm.

Rotation Speed #1: 0-200 rpm

Frequency #1: 2800 BPM

Weight #1: 419 lb. / 190 kg.

Steel Size #1: T45/T38

Drifter #2: YH80A

Hole Diameter #2: 2.5-4.5 in. / 64-114 mm.

Rotation Speed #2: 0-200 rpm

Frequency #2: 2600 BPM

Weight #2: 462 lb. / 210 kg

Steel Size #2: T51 / T45

Hydraulic Pressure: 2130 psi / 150 kg/cm?

BOOM & GUIDE

Horizontal Boom Swing: 30 deg R / 34.6 deg L

Vertical Boom Movement: 51 deg up / 15 deg down

Guide Swing: 48 deg R / 40 deg L

Guide Dump: 180 deg

Boom Extension - YH70 (YH80A): 48 in (30 in) / 1,219 mm (162 mm)

Drifter Travel - YH70 (YH80A): 15 ft 4 in (14 ft) / 3,099 mm (4,267 mm)

Guide Extension: 4 ft / 1,219 mm

Overall Guide Length: 23 ft 8 in / 7,214 mm

ENGINE

Type: Cummins 6CT8.3

Rated Power: 215 HP / 159 kW

Operating Speed: 2350 rpm

IR ROTARY SCREW COMPRESSOR

Compressor Pressure (max): 140 psig / 9.8kg/cm2

Compressor Volumen: 250 cfm / 7m?/min

GENERAL

Gradeability: 35o

Tramming Speed: 2 mph / 3.3 km/hr

Grouser Width: 12 in. / 305 mm

Steel Length: Starter rod 14 ft. / 4.27 m.

WEIGHT & DIMENSIONS

Length: 232.9' / 5918 mm

Weight #2: 24,500 lb / 11,150 kg.

Ground Clearance: 18' / 457 mm